Challenger 2-Post Lift LE10
MODEL# LE10 | 10,000 LB. CAPACITY
» 2-post symmetric/asymmetric lift
» 3-stage front and 2-stage rear arms
The LE10 (10,000 lb. capacity) 2-post lift features Challengerʼs innovative 3-stage front and 2-stage rear arms, which provide technicians with the versatility to lift vehicles both symmetrically and asymmetrically within the same service bay, increasing efficiency and potential revenue.
With double telescoping screw pads, durable powder coat finish and plated arm restraints and pins, the LE10 accommodates the rigorous demands
of a full-service facility. Raise it even higher with optional column height extensions, which provide an additional 2 feet of overhead clearance. Lifts are available in red or blue.
6 in stock
» 3-stage front arms and 2-stage rear arms provide a wide arm sweep for asymmetric or symmetric lifting in the same service bay
» 11ʼ 11.875” standard height fits in service bays with 12ʼ ceiling height
» Double telescoping screw pads with rubber foot pads
» Padded overhead shut-off system prevents vehicle damage
» Jacketed pulley-less single-point mechanical lock release system that was once exclusive to our CL series lifts are now standard on the LE10
» Rubber door guards protect vehicle from door damage
» Premium powder coat finish provides long-lasting durability
» Plated arm restraints and arm pins inhibit rust and provide long-lasting durability
|10,000 lbs. (4536kg)|
|A - Rise Height1||74-3/4" (1899mm)|
|B - Overall Height (Cylinder Extended)||143.875”|
|C - Overall Width||131.75”|
|D - Drive-Thru Clearance||98.375”|
|E - Floor to Overhead Switch||137”|
|F - Front Arm Reach||21.75” / 39.25”|
|G - Rear Arm Reach||38.75” / 55.375”|
|H - Screw Pad Height2||4.25” / 6.75”|
|I - Inside of Columns||110.25" (2800mm)|
|Motor||2HP, Single Phase, 60Hz|
|Voltage||208v - 230v|
|Speed of Rise||43 seconds|
|Ceiling Height Required|
|Shipping Weight||1750 lbs. (794 kg)|
Lifts are shipped via LTL or Flatbed Freight Carrier. Please consult the factory at 800-766-0150 for more information about shipping arrangements and offloading your product.
Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lift, Inc., www.challengerlifts.com.
This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.
This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.
The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson. Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units, cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.
Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.
Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE